 |
 |
 |
 |
 |
 |
 |
| Home | All Products | Kits | Image Discs | Special Polish (10ml) | Princess Polish (12ml) | Accessories | Gallery | Demos | FAQS | Contact |
 |
|
Application
|
||||
 Apply base coat... (any regular nail polish) |
 Apply special 'Konad Nail Art Polish' to the Disc... |
 Remove excess polish by scraping away from yourself, at an angle, until the scraper snaps off the edge of the disc. Scrape only once and make it a good and firm snap. (If you are holding the scraper at the wrong angle you will not get a snap sound and may catch the edge of the scaper in the etched design.) |
||
 IMMEDIATELY push down firmly and ROLL in one smooth motion to pick up the design with the stamper. You may also press straight down and immediately "Pop" the stamper up. You must be quick between the scraping and design pick up! |
 Firmly ROLL the image onto your nail. Don't stamp, ROLL! |
 Apply Konad Top Coat with a quick swipe. Konad Top Coat is formulated not to smear your nail art, as other top coats are likely to do. Don't continue to brush the Top Coat, as you can make it run if you work at it, especially over the darker stamping colors. |
||
|
Applying Top Coat * Apply top coat quickly and slightly just once dividing into 2 or 3 parts. (Do not dab or repeat!) | ||
 |
 |
 |
 |
 |
 |
|
Clean Stamp, Scraper, and Image Plate with
nail polish remover. | ||
 |
 |
 |
 |
 |
 |
|
Multi Color
Application |
 | |||
 |
 |
 |
 | |
|
Try different
colors with different designs! |
 |
 |
 | |
|
| ||||
|
| ||||
 | ||
 |
 |
 |
1. Apply a dab of top coat to the desired point on your nail. |
2. Dip the wood/acrylic stick into the top coat brush. |
3. Pick the rhinestone up witht the tip of the stick. |
 |
 |
 |
4. Apply to the desired point on your nail. |
5. Finish with a top coat for best results. | |